Filter
Top Products
SmartConnect User’s Guide
104
Chapter 9: Switch Policies BMD00082, February 2009
See also:
“Virtual Switch Groups Membership” on page 97
“Internal Port Settings” on page 102
“Stacking” on page 43
Management Port Settings
Use this window to configure management port settings.
See also:
“Virtual Switch Groups Membership” on page 97
“Stacking” on page 43
Table 9-3 Management Port Settings Fields
Field Description
Port Displays the port number. This field is non-configurable.
Note: If the switch is part of a multi-switch stack, the displayed number
indicates the Configured Switch number (csnum) followed by the port
number. See “Stacking Port Numbers” on page 54 for more informa-
tion.
Group Displays the VSG for the port. as “Management.”
Port Name Set the port name which appears on information and statistics displays.
Status Set the operational status of the port: enable or disable.
Speed and Duplex Select the proper speed and duplex setting for the port.
Flow Control Select the flow control setting (rx, tx, both, none).