Filter
Top Products
SmartConnect User’s Guide
120
Chapter 10: System Settings BMD00082, February 2009
Local User Administration
VSE SmartConnect software provides three built-in (static) user accounts, and up to ten end-
user accounts.
Built-In Users
The following types of user accounts are always available:
User
The User has no direct responsibility for Virtual Switch Extension (VSE) for IBM Blade-
Center, SmartConnect, management. He or she can view all status information and statis-
tics but cannot make any configuration changes to the Virtual Switch Extension (VSE) for
IBM BladeCenter, SmartConnect,.
Operator
The Operator manages various functions of the Virtual Switch Extension (VSE) for IBM
BladeCenter, SmartConnect,. The operator can view all information and statistics and can
reset ports.
Administrator
The super-user Administrator has complete access to all menus, information, and configu-
ration commands on the Virtual Switch Extension (VSE) for IBM BladeCenter, Smart-
Connect,, including the ability to change both the user and administrator passwords.
Table 10-4 Built-In User Administration Fields
Field Description
Username Displays the username for this user type.
Password Sets the password for this user type, up to 15 characters.
User Type Displays the authority level for the user type. SmartConnect defines these
levels as: User, Operator, and Administrator, with User being the most
restricted level.
Enabled Enables or disables the user type.