Filter
Top Products
SmartConnect User’s Guide
150
Chapter 12: Switch Information BMD00082, February 2009
Port Transceiver Status
The following table describes the Transceiver information fields.
Trunk Groups Information
The following table describes the Trunk Group (Portchannel) information fields.
Table 12-13 Transceiver information
Field Description
Port Displays the port number and SFP/XFP number.
Device Displays the transmission media and device type for the port, as fol-
lows:
Media:
CU (Copper SFP)
FI (Fiber SFP)
SR (Short Range XFP)
LR (Long Range XFP)
Device: SFP or XFP module
TX-Enable Displays the transmission status of the module (enabled or disabled).
RX-Signal Displays the link state of the module port (OK or LOST).
TX-Fault Displays the fault status of the module (none or FAULT).
Table 12-14 Trunk Group information
Field Description
Trunk Group Displays the Trunk number.
Protocol Displays the protocol used by the trunk (static or LACP)
Virtual Switch Group Displays the VSG supported by the trunk.
Switch Port Lists the port members of the trunk.
Note: If a switch is part of a multi-switch stack, the displayed number
indicates the Configured Switch number (csnum) followed by the port
number. See “Stacking Port Numbers” on page 54 for more information.
Status Displays the status of the trunk.