Filter
Top Products
SmartConnect User’s Guide
134
Chapter 11: Boot Management BMD00082, February 2009
The following table describes the buttons on the Boot Management window.
See also:
“Boot Schedule” on page 135
Table 11-1 Boot Management buttons
Field Description
Reboot the Module Performs a software reboot/reset. The software image specified in the Image
to boot drop-down list becomes the active image.
Get Image Loads the software image specified in the Remote File Name field to the
switch. Places the software in the block specified in the Image to transfer
drop-down list.
Put Image Loads the software image specified in the Image to transfer drop-down list to
the remote server. Places the software in the file name specified in the Remote
File Name field.
Get Cfg Loads a configuration file specified in the Remote File Name field from the
remote server to the switch. Places the configuration file into the active con-
figuration block.
Put Cfg Loads the active configuration file to the remote server. Places the configura-
tion into the file name specified in the Remote File Name field.
Put TS Dump Loads the technical support dump file to the remote server. Places the dump
into the file name specified in the Remote File Name field.
Put Crash Dump Loads the switch system crash dump file to the remote server. Places the dump
into the file name specified in the Remote File Name field.
Clear Crash Dump Clears the switch system crash dump.