Filter
Top Products
SmartConnect User’s Guide
146
Chapter 12: Switch Information BMD00082, February 2009
ServerMobility Port Information
The following table describes the ServerMobility Port information fields.
See also:
“ServerMobility General Configuration” on page 115
“ServerMobility Port Information” on page 146
Table 12-11 Server Mobility Port information
Field Description
client-id Displays the client identifier value (option 61) that will be encoded by the
switch in the DHCP request packets received on the port.
agent.circuit-id Displays the relay agent circuit ID sub-option value that will be encoded in the
DHCP request packets received on the port.
agent.remote-id Displays the relay agent remote ID sub-option value that will be encoded in
the DHCP request packets received on the port.
Server Mobility Displays the current ServerMobility status of the port (enabled or disabled).
Filtering Displays the current DHCP filtering status of the port (enabled or disabled).
Failover Port Displays the backup port or the active port associated with the port.
Failover State Displays the current failover status of the port, as follows:
active
standby
fail
If the failover state of the port is active, DHCP requests received on the port
will be relayed by the switch.
If the failover state is standby or fail, the DHCP requests will not be relayed.
The switch will respond to DHCP requests received on standby ports with a
temporary IP address.