Filter
Top Products
SmartConnect User’s Guide
102
Chapter 9: Switch Policies BMD00082, February 2009
Internal Port Settings
Use this window to configure internal port settings.
See also:
“Virtual Switch Groups Membership” on page 97
“External Port Settings” on page 103
“Port-Based VLAN Tagging” on page 28
“Stacking” on page 43
“DiffServ Code Point QoS” on page 113
Table 9-1 Internal Port Settings Fields
Field Description
Port Displays the port number. This field is non-configurable.
Note: If the switch is part of a multi-switch stack, the displayed number
indicates the Configured Switch number (csnum) followed by the port
number. See “Stacking Port Numbers” on page 54 for more informa-
tion.
Group Displays the current VSG for the port. To configure the VSG, see “Vir-
tual Switch Groups Membership” on page 97.
Enable Set the operational status of the port: enable or disable.
Name Set the port name which appears on information and statistics displays.
Flow Control Select the flow control setting (rx, tx, both, none).
PVID Select the Port VLAN Identifier (PVID). If a PVID is configured, when
untagged traffic ingresses on the port, the configured VLAN tag will be
automatically added. Upon egress, if the PVID of the egress port
matches the packets’s tag, the tag will be stripped from the packet.
Internal Trunk ID Configures the trunk ID for internal ports. Ports in the same VSG that
have the same internal trunk ID form a trunk. Specify a value between 1
and 56, or 0 (zero) for none.
Note: This field is available only when stacking is configured.
DSCP Remarking Enable or disable DiffServ Code Point (DSCP) remarking for the port
(see “DiffServ Code Point QoS” on page 113).