Filter
Top Products
SmartConnect User’s Guide
BMD00082, February 2009 Chapter 12: Switch Information
141
Virtual Switch Group Information
The following table describes the VSG information fields.
Note – For port numbers, if a switch is part of a multi-switch stack, the displayed number
indicates the Configured Switch number (csnum) followed by the port number. See “Stacking
Port Numbers” on page 54 for more information.
Table 12-4 Virtual Switch Group Information Fields
Field Description
VM MAC Address Displays a list of the MAC addresses of Virtual Servers that are mem-
bers of the VSG. Optional.
Internal Ports Displays a list of the internal port members in the VSG. Optional.
Ports in External Trunk 1 Displays a list of external ports that are members of the first external
trunk of the VSG.
Ports in External Trunk 2 Displays a list of external ports that are members of the second external
trunk of the VSG.
Oper Disabled External Ports Displays a list of ports that were disabled due to trunk policy because of
different type ports member in same external trunk or too many ports of
same type member in same external trunk.
External Trunk Displays a list of the list of ports which are members in the second
external trunk of the group.
LACP Displays the LACP status of the VSG (enabled or disabled).
IGMP Displays the status of IGMP Snooping for the VSG (enabled or dis-
abled).
Failover Displays the Failover status of the VSG (enabled or disabled)
Failover Limit Displays the number of ports in the VSG that must fail before Failover
occurs.
BPDU Policy Displays the BPDU Policy setting (drop, guard, or flood).
ACL SCM Group config Displays the ACLs configured for the group.