Filter
Top Products
SmartConnect User’s Guide
BMD00082, February 2009 Chapter 6: Configuring Switch Access
65
Configuring Management Module for Switch Access
Complete the following initial configuration steps:
1. Connect the Ethernet port of the management module to a 10/100 Mbps network (with
access to a management station) or directly to a management station.
2. Access and log on to the management module, as described in the blade server chassis
Management Module User’s Guide.
The management module provides the appropriate IP addresses for network access (see the
applicable blade server chassis Installation and User’s Guide publications for more informa-
tion).
3. Select I/O Module Tasks > Configuration on the menu on the left side of the blade
server chassis Management Module window.
Figure 6-A Switch Configuration in the Management Module Window