Filter
Top Products
SmartConnect User’s Guide
BMD00082, February 2009 Chapter 12: Switch Information
145
ServerMobility
These windows display information about the ServerMobility feature:
“ServerMobility General Information” on page 145
“ServerMobility Port Information” on page 146
ServerMobility General Information
The following table describes the general ServerMobility information fields.
Note – For port numbers, if a switch is part of a multi-switch stack, the displayed number
indicates the Configured Switch number (csnum) followed by the port number. See “Stacking
Port Numbers” on page 54 for more information.
See also:
“ServerMobility General Configuration” on page 115
“ServerMobility Port Information” on page 146
Table 12-10 ServerMobility General information
Field Description
ServerMobility settings Displays the current ServerMobility status (enabled or disabled).
ServerMobility Encoding
Scheme
Displays the current scheme used for encoding the Client Identifier
(option 61) and Relay Agent Information (option 82) in DHCP request
packets.
ServerMobility ports Displays the ports that have ServerMobility enabled.
DHCP request filtering
enabled ports
Displays the ports on which filtering of DHCP request information is
enabled.
Relay on non-ServerMobil-
ity ports
Displays the current BOOTP relay status (enabled or disabled) for all
ports that have ServerMobility disabled.
Active-Backup ports Displays the active ServerMobility ports and their backup ports.
Auto-Recovery Displays the current DHCP failover status (enabled or disabled) of
ServerMobility ports.
Auto-Recovery Time Displays the current lease time of the temporary IP addresses that are
assigned by the switch to blade servers connected to a backup (standby)
ServerMobility ports.