Filter
Top Products
SmartConnect User’s Guide
BMD00082, February 2009 Chapter 12: Switch Information
147
SNMPv3 Information
The following table describes the SNMPv3 information fields.
Table 12-12 SNMPv3 information
Field Description
Engine ID Displays the unique identifier for the SNMP engine.
usmUser Table
User Name This text string represents the name of the user that you can use to
access the switch.
Authentication Protocol This indicates whether messages sent on behalf of this user can be
authenticated, and if so, the type of authentication protocol which is
used. VSE SmartConnect software supports two authentication algo-
rithms: MD5 and HMAC-SHA.
Privacy Protocol This indicates whether messages sent on behalf of this user are pro-
tected from disclosure, and if so, the type of privacy protocol which is
used. VSE SmartConnect software supports DES algorithm for privacy.
vacmAccess Table
Group Name Displays the name of group.
Prefix Displays the prefix that is configured to match the values.
Model Displays the security model used, for example, SNMPv1, or SNMPv2
or USM.
Level Displays the minimum level of security required to gain rights of access.
For example, noAuthNoPriv, authNoPriv, or authPriv.
Match Displays the match for the contextName. The options are: exact and pre-
fix.
ReadV Displays the MIB view to which this entry authorizes the read access.
WriteV Displays the MIB view to which this entry authorizes the write access.
NotifyV Displays the Notify view to which this entry authorizes the notify
access.
vacmViewTreeFamily Table
View Name Displays the name of the view.
Subtree Displays the MIB subtree as an OID string. A view subtree is the set of
all MIB object instances which have a common Object Identifier prefix
to their names.
Mask Displays the bit mask.