Filter
Top Products
SmartConnect User’s Guide
BMD00082, February 2009 Chapter 10: System Settings
127
SSH/Telnet Settings
Note – For security purposes, the ability to change SSH and Telnet settings through the BBI is
disabled by default and the fields in this window are subdued. To allow the BBI to make Telnet
and SSH changes, use the following CLI command: /cfg/sys/access/tsbbi enable.
Switch SSH Settings
Use these fields to configure Secure Shell (SSH) settings.
Switch Telnet Settings
Use these fields to configure Telnet settings.
Table 10-13 SSH Configuration Fields
Field Description
SSH Time Interval Set the interval for auto-generation of the RSA server key.
SSH Port Sets the SSH server TCP port number.
SSH Generate Host Key Generates the RSA host key.
SSH Generate Server Key Generates the RSA server key.
SSH Server State Enables or disables the SSH server.
SCP Admin Password Set the administration password for SCP access.
SCP Apply and Save Enables or disables SCP apply and save.
Table 10-14 DSCP Configuration Fields
Field Description
Telnet Access Enables or disables Telnet access.
Telnet Port Sets an optional telnet server TCP port number for cases where the
server listens for telnet sessions on a non-standard port.