Intel 470 Switch User Manual


 
32
CHAPTER 4
Intel
®
NetStructure 470T and 470F Switches User Guide
Configuring a Port
You can use the Web Device Manager to enable or disable a port, and to
change its speed, duplex, flow control, and priority settings.
To change port settings
1 Click the Configure Device menu, and then click Port Settings. To
access the Port Settings for a port, click the port you want to configure
on the faceplate graphic.
2 In the boxes, click the options you want to change:
Port State lets you enable or disable the port.
Speed/Duplex lets you set port speed and duplex.
Flow Control lets you enable or disable flow control.
Priority Queue (802.1p) lets you set the switch priority queue for
packets sent or received on this port.
3 Click Submit.
NOTE
If you change the flow control or
IP settings, you must reboot the
switch before the new settings
can take effect.