Filter
Top Products
89
Using Local Management
CHAPTER 5
Local Management
Add an IEEE 802.1Q VLAN (Configure
Port Membership)
Description
VLAN Name: Assigns a name to the VLAN. The name can consist of any
character (no spaces) and be up to 12 characters long. After a VLAN is
created the name cannot be changed.
VLAN ID: Assigns a unique ID number for the VLAN. This number is
used to identify all packets belonging to that VLAN. Type a number from 2
to 4094. The DEFAULT_VLAN (created when you select a VLAN mode)
has a VID of 1.
Allow IGMP Snooping: Indicates if the switch performs IGMP snooping
on this VLAN (press z). A maximum of 12 IGMP snooping
sessions are allowed.
Member: Identifies which ports are part of the VLAN being created. Press
z to toggle the following options:
<Yes> The port is a member of the VLAN.
<No > The port is not a member of the VLAN.
– The port is part of an aggregated link.
NEXT: Sends you to the Add an IEEE 802.1Q VLAN (Configure Port
Tagging) screen.
LOCATION
Main Menu
Configure VLAN
Create an 802.1Q VLAN
NOTE
A ‘+’ next to the Member indicates
that the port is a member of more
than one VLAN.