Filter
Top Products
Terminal Emulation Menu Screens
SECTION 3
3-34
6400 Hand-Held Computer User’s Guide
Selecting More moves you to select the telnet option for the
VT/ANSI data stream.
1) Telnet
2) Term Setup
3) Send XON
4) Keypad Mode
5) Cursor Mode
6) Terminal Mode
VT/ANSI
1) Telnet allows for the handling of telnet option negoti-
ations to establish a s ession with an appropriate telnet
server. This can not be changed if you are using 6400 TCP/
IP.
Make your selection, then press the
[ENT]
key to return t o
the Protocol Opts menu.
1) ANSI
2) VT100
3) VT220
4) VT320
5) VT350
Term Setup
2) Terminal Setup allows you to select compliance level of
the terminal being emulated. Default is VT340 to support
all commands.
3) Send XON, default is enabled. Enabled indicates that
whenever an RIS is received from the host the XON charac-
ter is returned back af ter compliance of this command.