Filter
Top Products
Terminal Emulation Menu Screens
SECTION 3
3-26
6400 Hand-Held Computer User’s Guide
Protocol Options
Use this selection to designate the hand-held computer type
of the host computer. You can also designate which addi-
tional commands and command sets are available.
The Protocol O pts m enu has seven submenus to customize
your hand-held computer. The Protocol Opts menu is shown
on the next page.
1) Host View Sze
2) Data Stream
3) Extended Cmds
4) 5250
5) 3270
6) VT/ANSI
7) Native
Protocol Opts
6400 WTP only,
blank if TCP/IP
Host View Size
The Host View Size option tells the hand-held computer the
format of display information sent from the host. The dis-
play viewing size equals 1920 (determined by taking the
number of rows times the number of columns). The excep-
tion is with 5250 Terminal Emulation which can have an
additional row for error messages and therefore can have
2000 characters instead of 1920.
The default setting for 6400 WTP using Native Terminal
Emulation is 120 columns by 16 rows (equals 1920). The
default for VT220 Terminal Emulation is 80 columns by 24
rows (equals 1920). The default for 5250 Terminal Emula-
tion is 80 columns by 24 rows (25 with error messages).
The default for 3270 Terminal Emulation depends on what
the original setting was before you changed to 3270 Termi-
nal Emulation. Remember that the total characters must
equal 1920 (number of rows by the number of columns) un-
less using 5250 Terminal Emulation with error mess ages.