Filter
Top Products
Terminal Emulation Menu Screens
SECTION 3
3-44
6400 Hand-Held Computer User’s Guide
(the data on the screen does not appear to move). When you
scroll off the edge of the displayed page, the display snaps
to the next (or previous) page. Upon reaching the boundary
of the CRT screen, the cursor stops moving and an error
tone sounds each time you attempt to move beyond the
boundary.
"
NOTE:
Some “pages” in Page Mode overlap each other (the same informa-
tion is shown on both pages). This overlap occurs because the 24
row by 80 column CRT screen cannot be divided equally.
Lazy Mode
starts the cursor in the upper left corner of the
hand-held computer display. The cursor moves across the
display in the scrolled direction. When the cursor goes be-
yondtheedgeofthedisplay,thedatabeginstomoveinthe
opposite direction that the cursor is moving in and the cur-
sor remains at the edge of the display. When you reach an
outside boundary of the full CRT display, an error tone
sounds each time you try to move beyond the boundary.
When
Locked Mode
is selected the screen view is locked to
the upper left hand corner of the display. Any characters
outside of t he display window size you select are written to
the screen, but you can not see them. The windowing keys
do not move the visible window.
"
NOTE:
In 5250 emulation the err_row is mapped to the last row of the
screen size selected.
Annunciators
You can select and change the location of the annunciators
on your display screen. The default is the lower right cor-
ner, the other choices are any of the other three corners.
You can also select Stealth Mode which displays the annun-
ciators only when you make a change and then hides it
when you press a key.