Filter
Top Products
Chapter 5---Troubleshooting
5-7 Model 330, 340SC, and 370SC Service Manual
5.4 Main Menu Structure
1. CHANNEL MENU
>
2. STATUS MENU
3. ILA MENU
>
4. DIAGNOSTIC MENU
>
5. TIMING MENU
>
6. VIDEO QUICKSET
>
7. GRAPHIC ENHANCE
>
CHANNEL MENU
1. CHANNEL LIST
2. AUTOSELECT LIST
3. COPY CHANNEL
4. UPDATE DEFAULTS
5. IMPORT CHANNEL
6. EXPORT CHANNEL
7. COPY PARAMETERS
>
8. DECODER SETUP(option)
>
CHANNEL LIST
CH IN SL NAME
1 RGB1 ST INIT
2 RGB1 ST
3 PC1 BP
4 V VTR BP .
.
29. NA ST
30. NA ST
TEST PATTERN MENU
(To access a test
pattern, select TEST
on the remote)
1. EXTERNAL VIDEO
2. WHITE X-HATCH
3. RGB X-HATCH
4. DOT PATTERN
5. PLUGE
6. STATIC FLAT FIELD
7. ADJUST FLAT FIELD
8. H-GRID
9. GREY SCALE
10 CONTRAST/BRIGHT
STATUS MENU
1. CH 1.... LNDBL
2. HORZ RATE 16.0 KH
3. FRAME RATE 30.5H
4. INTERLACE YES/NO
5. SYNC.... INT/EXT
6. PROJ ADD 0
7 SHOW ADD ON/OFF
8. SHOW ERR ON/OFF
9. CPU SW... 5.1.0
10. DSP SW... 2.0.4.
AUTOSELECT LIST
AUTOSELECT IS ON/OFF
GROUP 1-10
CHANNELS 1-10
N/A
TIMING SETUP MENU
1. PINCUSHION POSN
2. MENU POSITION
3. 2H SYNC ENABLE
4. SHIFT SYNC
DIAGNOSTICS MENU
This menu should be used
only by Hughes certified
engineer/technicians
.
DECODER SETUP (OPTIONAL)
1. SELECT STANDARD------NTSC-M
PAL-BDGI, PAL-N, SECAM, PAL-M,
PAL-4.43, NTSC-M, NTSC-4.43,
BLK/WHT
The remainder of items in this menu are
for use by HJT certified engineers and
technicians only.
ILA BIAS MENU
1. ADJUST WITH VIDEO
2. ADJUST, NO VIDEO
3. MAX-ON, NO VIDEO
4. FREQUENCY ADJUST
5. MAX-ON WITH VIDEO
MAIN MENU
.
.
.
XY- REG AXIS MENU
1. OFFSET THIS AXIS
2. CLEAR THIS AXIS
3. CLEAR CONVG AXES
4. CLEAR ALL AXES
5. SEE X AXIS VALUES
6. SEE Y AXIS VALUES
SHADE AXIS MENU
1. OFFSET THIS AXIS
2. CLEAR THIS AXIS
3. CLEAR SHADE AXES
4. PROPTN THIS AXIS
5. INIT THIS PROPTN
6. INIT ALL PROPTN
7. SEE AXIS VALUES
CONVERGENCE MENU: Press POS/CONV to enter the
Convergence Mode, then use Mode key to select XY or
Sensitivity or Threshold, then press Menu to get either the XY
REGISTRN or SHADE AXIS MENU below.
.
VIDEO QUICKSET
1. 80% SENSITIVITY
2. 20% THRESHOLD
3. VIDEO SENSITIVITY
4. VIDEO THRESHOLD
COPY PARAMETERS
1. X, Y CONVERGENCE
2. SHADE & PROPORTNS
3. PROPORTION VALUES
4. SHADE, NO PROPTNS
5. ILA BIAS & FREQ
6. GEOMETRY SETTINGS
.
.
.
GRAPHIC ENHANCE
1. WHITE ENHANCE
2. BLACK ENHANCE
.
Version 5.1.0 Software Menu Diagram
Software versions are indicated on the Status Menu,
and may be supplemented in Field Service Bulletins.
KEY:
HELP
= Press left or right arrow.
>
= Submenu available
Figure 5-1
Menu Structure Diagram.