Kodak Kodak 10/100 Network Interface Card Printer User Manual


 
Printing
11-4 July 1998
P
R
I
N
T
I
N
G
11.4 Printing in PostScript Mode from Windows/DOS Systems
11.4.1 Printing from Windows
To print from applications to a Kodak printer in PostScript mode:
IMPORTANT: To avoid printing problems, make sure that ÒCtrlDÓ job
termination is disabled in Printer PostScript properties.
1. Select File>Page Setup and verify settings consistent with your
printer.
2. Select File>Print.
3. Select the printer that was created by the Add Printer mechanism.
4. Check printer settings for consistency with current printer media
before selecting OK.
11.4.2 Printing from DOS
NPrint
Print to the printer as if it were any other Novell print server. For example,
use the Novell CAPTURE command to redirect one of the LPT ports to a
queue serviced by the Network Interface Card. If the Þle server is named
raisa and the queue is named lp1, the command to redirect to LPT1
would be:
CAPTURE /S=raisa /Q=lp1
Use NPRINT to print as shown in the following example:
NPRINT myÞle S=raisa Q=lp1
You can include the /notify option to send a message to users who send
jobs once the jobs successfully print. For example:
NPRINT myÞle S=raisa Q=lp1 /notify
Copy
Use COPY to print to an LPT port redirected to a network port.
COPY myÞle LPT1