Filter
Top Products
Windows for WorkGroups (3.x)
July 1998 5-1
W
I
N
D
O
W
S
3
X
5 Windows for WorkGroups (3.x)
Refer to Kodak Printer/NIC Installation and ConÞguration Overview in
Chapter 1 for overall conÞguration process steps and details. In the list
below, the steps described in this chapter are highlighted.
Step 1: Assess your network/printing environment
Step 2: Gather the necessary components
Step 3: Install the NIC hardware, if needed
Step 4: ConÞgure the NIC, if necessary
Step 5: ConÞgure print servers, if needed
Step 6: ConÞgure the printer on user workstations
Step 7: Printing
5.1 ConÞgure the NIC
If possible, start with the default parameters. TCP/IP protocol is the only
protocol that minimally requires conÞguration of an IP address. if you
need to conÞgure NIC network parameters in Windows environments,
refer to Chapter 3, FastManage or Appendix A, Telnet.
5.2 ConÞgure the Workstation for Printing
You should verify that this platform is supported for printing to your printer
or proofer. Refer to the user guides and software provided with your
printer or proofer for information about installing software to support
PostScript and raster printing, calibration, etc. If needed, refer to
Appendix E, Technical Assistance.