Kodak Kodak 10/100 Network Interface Card Printer User Manual


 
Windows - FastManage Configuration Utilities
3-32 July 1998
F
A
S
T
M
A
N
A
G
E
3. Enter net? at a DOS prompt for more information about the utilities.
3.10.1 DOS Tools for NetBIOS
If you have problems installing and using the NetBIOS management
tools, the following suggestions might help:
¥ When using the showprn.exe tool, and the printer/NIC does not
appear, issue the command with a -d0, -d1 or -d2 switch:
showprn.exe -d1
This causes showprn to use an alternate stack to send the packet.
This problem shows up sometimes in systems that have multiple NICs
or multiple protocols loaded. If a -d1 switch was used with the
showprn.exe tool, use it on the NBMON command line.
¥ If the IPX protocol is loaded and running on a system running
Windows 95, the check box for Send NetBIOS over IPX should not be
checked.
Send NetBIOS over IPX is located in the Control Panel--> Network-
-> IPX Compatible Protocol screen.
¥ Open up the Control Panel, Networks screen. Choose NetBEUI
protocol. Check the checkbox marked Set this Protocol to be the
Default Protocol. In Windows 95, it is located in the Advanced
Options window.