Filter
Top Products
Basic Operation
3-56
Recalling Programs
Use the procedure below to recall a registered program.
If the Program key is pressed
1 Press the Program key.
2 Press [Recall] and press the key corresponding to
the program number (01 to 50) to recall. Press the
Quick No. Search key or [No.] to enter the
program number directly for recalling.
If [Program] is pressed in the copy function screen
NOTE: If the program cannot be recalled, the
Document Box or the form overlay specified in the
program might have been deleted. Check the
Document Box.
[Program] can be pressed in each function to call up
the program registered for the function.
3 Place the originals and press the Start key.
Copying is performed according to the registered
program.
Editing and Deleting Programs
You can change program number and program name, or delete program.
Use the procedure below to edit or delete a program.
1 Press the Program key.
2 Press [Edit] and press the key(s) corresponding to
the program number (01 to 50) to change or delete.
3 To edit a program, use the procedure for registering
a program and press [Change]. Then change the
program number and program name and press
[Save]. Choose [Yes] in the confirmation screen to
change the program.
To delete the program, press [Delete this Program].
Choose [Yes] in the confirmation screen to finally
delete the program.
No.
Recall Add
Edit
10/10/2010 10:10
Status
Eco Copy Confidential Stamp
Send 2 FAX 1
ID Card Copy
FAX 2
Send 1
Box 1
01 02 03 04
05 07 0806
09 10 11 12
13 15 1614
17 19 20
18
No.
Status
Send 2 FAX 1 FAX 2
Send 1
Box 1
01 02 03 04
05 07 0806
09 10 11 12
13 15 1614
17 19 20
18
Image QualityOrg./Paper/
Finishing
Quick Setup Layout/Edit Advanced
Setup
Program
10/10/2010 10:10
Eco Copy Confidential StampID Card Copy