Filter
Top Products
Sending Functions
6-37
6
FTP Encrypted TX
This allows you to encrypt documents when you send them. If you select [On] in this option, you can then select
the encryption method in the basic send screen.
Use the procedure below to scan and send originals as encrypted files.
1 Press the Send Key.
2 Place the originals in the document processor or on
the platen.
3 Press [Advanced Setup], [ ], and then [FTP
Encrypted TX].
4 Press [On].
5 Press [OK].
NOTE: You can only change the settings by logging in
with administrator privileges.
Refer to Adding a User (Local User List) on page 10-5
for the default login user name and password.
Click Settings -> Advanced -> Secure Protocols in the
Command Center RX. Be sure that SSL of Secure
Protocol Settings is On and one or more effective
encryption are selected in Clientside Settings. For
details, refer to the Command Center RX Operation
Guide.