Kyocera 8000i All in One Printer User Manual


 
Default Setting (System Menu)
9-94
Protocol Detail
The table below lists the network related function settings. The network related functions are available when
TCP/IP is On.
Item Description
Default
Setting
Restarting
the System*
* Y: The machine must be restarted after the setting is changed.
N: The machine does not need to be restarted after the setting is changed.
NetBEUI Selects whether or not to receive documents using
NetBEUI.
On Y
LPD Select whether or not to receive documents using LPD as
the network protocol.
On Y
SMTP
(E-mail TX)
Select whether or not to send e-mail using SMTP. Off N
POP3
(E-mail RX)
Select whether or not to receive e-mail using POP3. Off N
FTP Client
(Transmission)
Select whether or not to send documents using FTP.
When selecting [On], set the FTP Port Number. Use the
FTP default port 21.
On
Port:21
N
FTP Server
(Reception)
Select whether or not to receive documents using FTP. On Y
SMB Client
(Transmission)
Select whether or not to send documents using SMB.
When selecting [On], set the SMB default Port Number.
Use the SMB default port 139. For Windows Vista, use 445.
On
Port:139
N
i-FAX Select whether or not to use i-FAX. On N
LDAP Select whether or not to use LDAP. Off N
SNMP Select whether or not to communicate using SNMP. On Y
SNMPv3 Select whether or not to communicate using SNMPv3. Off Y
HTTP Select whether or not to communicate using HTTP. On Y
HTTPS Select whether or not to communicate using HTTPS.
SSL must be set to [On] in SSL on page 9-97.
On Y
IPP Select whether or not to communicate using IPP. When
selecting [On], set the IPP default Port Number. Use the
IPP default port 631.
Off
Port:631
Y
IPP over SSL Select whether or not to use IPP over SSL.
SSL must be set to [On] in SSL on page 9-97.
Off Y
Raw Port
Select whether or not to receive documents using Raw Port.
On Y
ThinPrint
(UG-31)
Select whether or not to communicate using ThinPrint. If set
to [On], you can set the port number that ThinPrint uses.
Normally 4,000 is used. SSL settings can also be selected.
On Y