Troubleshooting
12-10
* When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
Error Message Checkpoints Corrective Actions
Reference
Page
Check the paper in
the multi purpose
tray.
— The paper size is different. Set
selected size paper and press
[Continue].
2-38
Check the side
feeder.
— The side feeder is not installed
correctly. Attach the side feeder.
—
Confidential
document was
detected.
— The machine detects the document
guard pattern. Job is canceled. Press
[End].
9-103
Empty the punch
waste box.
Is the punch waste box full? Follow the instructions on the touch
panel and empty the punch waste
box.
11-10
Error occurred at
cassette #.
— Open the cassette. Check inside the
machine and remove the paper.
—
Error occurred at the
multi purpose tray.
— Remove the paper from the multi
purpose tray.
2-38
Failed to specify Job
Accounting.*
— Failed to specify Job Accounting
when processing the job externally.
The job is canceled. Press [End].
—
Failed to store job
retention data.
— The job is canceled. Press [End]. —
Folding tray is full of
paper.
Is the acceptable storage
capacity exceeded?
Remove the paper. Printing then
resumes.
—