Filter
Top Products
2-40
The alarm will continue to sound while the error condition continues (if the printer is in the sleep
mode, the alarm will be silent for that period alone). The alarm will cease to sound, however, when
the CANCEL key is pressed.
To rectify the various error conditions listed above, please refer to Chapter 5
of this manual, or to
the operating manuals accompanying the various optional equipment.
Notes
● If you wish to cancel the data being processed while the audio alarm is sounding, press the
CANCEL key twice. Firstly, the audio alarm will be turned off, and then the data processing will
be canceled.
● After the audio alarm has been set to Off, even if the PRESCRIBE IIe FRPO INIT command is
executed, the printer will not return to the initial (On) alarm setting. To set the audio alarm to On,
reset using the mode select menu from the control panel.
Selecting Buzzer Mode
1. Pressing the MODE key will put the printer in Mode Select mode.
2. Press + or – to select Others >.
3. Press the key.
4. Press the + or – key to display >Buzzer and then press the ENTER key. A ? will flash and the
current setting can be changed.
5. Press the + or – key and select the desired setting.
6. Press the ENTER key.
If you want to change the setting, press the CANCEL key before pressing the ENTER key.
7. Press the EXIT key. The Buzzer mode setting is now changed.
2.13. Setting the Audio Warning (Buzzer)