Filter
Top Products
Option 2
Option 1
Normal
On
KPDL (AUTO)
High Speed
Serial
Line Printer
Emulation >
HP LaserJet 5M
Interface >
Parallel
Number of copies
001
>Parallel I/F
Auto
On
>Baud rate
9600
Continued on next page
Emulation >
IBM Proprinter
>Data bits
8
>Barcode mode
Off
>Stop bits
1
>Code set
IBM US
>Parity
None
>Protocol
DTR (pos.)&XON
>>NetWare Frame
Auto
>>DHCP
OFF
>>IP Address
>>Gateway
>>Subnet Mask
>Code set
ISO-6 ASCII
Ready
PAR 600 A4 001
Emulation >
DIABLO 630
>Code set
DIABLO US
Emulation >
EPSON LQ-850
Emulation >
KC-GL
>Code set
LQ US
Emulation >
Emulation >
KPDL
>Print KPDL errs
Off
On
>Print KPDL errs
Off
>Alt. Emulation
HP LaserJet 5M
>KC-GL >
Pen width
>>Pen (1) width
01 dot (s)
>KC-GL Page set
[SPSZ]
(*
2
)
(*
1
)
Nibble (high)
>NetWare
Off
On
>TCP/IP
Off
>Ether Talk
Off
>Opt. StatusPage
Off
These items willl not show unless
the printer is installed with the
applicable option unit/kit.
Mode Select Menu
Basic Operations During
Mode Selection
This diagram gives quick reference to
all menu options and their sequence of
selection. Use this description in
combination with Chapter 2 Mode
Selection Menu.
1. Press the MODE key to enter Mode
Selction mode.
2. Press the + or – key repeatedly until
the message display indicates the
desired item.
3. Press the key to move to a
submenu.
Press the key to return.
4. Press the ENTER key once the
desired menu appears ? will flash,
and the current setting can be
changed.
5. Press the + and – key to select the
desired setting.
6. Press the ENTER key.
If you want to re-enter a setting,
press the CANCEL key before
pressing the ENTER key.
7. Press the EXIT key. This will enable
currently selected settings.