Filter
Top Products
2-30
2.8. Dumping Received Data
It is possible to print data received by the printer as hexadecimal code for the purposes of
debugging programs and files.
Selecting Dump Received Data Mode
1. Pressing the MODE key will put the printer in Mode Select mode.
2. Press + or – to select Others >.
3. Press the key.
4. Press the + key several times to display >Print HEX-DUMP and press the ENTER key. A ?
will be displayed.
5. Press the ENTER key again and >Processing will be displayed for awhile followed by
Waiting.
6. Send the data to be dumped to the printer. The printer will display Processing while it
receives the data.
7. Once all data has been received, the message Waiting will appear. Press the FORM FEED
key to finish printing.
Once the dumped data you require has been output, it is possible to cancel the printing of any
further dumped data by taking the printer offline by pressing the ON LINE key and then press-
ing the CANCEL key.
2.8. Dumping Received Data