Filter
Top Products
5-14
Error Messages
Table 5.3 Error Messages
Message Corrective Action
The total amount of data received by the printer exceeds the
printer’s internal memory. Try adding more memory (expansion
RAM). Press the CONTINUE key to resume printing. You can
abandon printing by the CANCEL key.
The data transferred to the printer was too complex to print on a
page. Press the CONTINUE key to resume printing. (The page
may break in some pages.) You can abandon printing by the
CANCEL key.
Note: After this message has been displayed, Page protect
mode will be On. To maintain optimum use of memory
during printing, display >Page protect from the control
panel, and re-select Auto.
See the last page in this manual.
Current print processing cannot continue.
To print out a error report, display >Print KPDL errs from the
mode select menu, and select On.
Press the CONTINUE key to resume printing. You can abandon
printing by the CANCEL key.
The memory card is accidentally removed from the printer’s
memory card slot during reading. If you continue reading the
memory card, insert the same memory card into the slot again.
The printer again reads it from the beginning of the data.
Note: We recommend that you follow the reading procedure
from the beginning to ensure correct reading of the
memory card.
Memory overflow
Press CONTINUE
Print overrun
Press CONTINUE
KPDL Error
Press CONTINUE
MEMORY CARD err
Insert again
5.5. Indicators and Messages