Filter
Top Products
2-7
Chapter 2 Operating the Laser Printer
Control Keys
The control panel keys are used to configure the printer.
Note
Settings made with these keys effect only the interface currently in use.
Key Function
ON LINE Switches the printer on-line and off-line.
CONTINUE 1. Depending on the message being indicated, there are cases where operation will
continue after pressing the CONTINUE key. If such a message is displayed, operation
will be resumed after pressing this key. (See Table 5.3)
2. Used as the key in the mode selection function.
STACK 1. Selects whether printed pages are delivered to the face-down or face-up tray.
The optional face-up output tray is required to output pages face-up. (See page 1-23.)
2. Lets you access the desired item or enter numeric values. In some of the control
procedures, the (CONTINUE) and (FORM FEED) keys are used to enter or exit
the sub items.
FORM FEED 1. Prints and feeds out one page.
2. Used as the key in the mode selection function.
1. Abandons a printing job, resets numeric values, or cancels a setting procedure.
2. Turns off the buzzer when the buzzer sounds.
EXIT 1. When pressed during mode selection, terminates the setting and returns to the Ready
condition.
2. Used to select the emulation, font, character code set; to read an memory card; to
select the automatic cassette mode; and others (See the last page in this manual.).
MODE
CANCEL
+
(Continued on next page)