Filter
Top Products
2-41
Chapter 2 Operating the Laser Printer
2.14. Memory Cards
This printer is equipped with memory card slots. This allows, for example, the use of fonts other
than internal fonts by using an optional font card. If a JEIDA Ver. 4.2 memory card is used, it is
possible to read, write and delete data and format the memory card.
Note
Only 32 MB or less flash or S-RAM type memory cards conforming to JEIDA Ver. 4.2 can be
written or formatted by this printer.
It is possible to set the partitions on the memory card which you wish to execute for the printer at
power-on by using the PRESCRIBE FRPO I0 command. For details on the FRPO command, see
Appendix C.
Font cards can be read from the control panel or read automatically upon power-on or printer reset
when a font card is inserted in the printer.
Inserting Memory Cards
Carefully insert the memory card as far as it will go with the top side facing up.
Memory Card Slot
Memory Card