Filter
Top Products
2-10
Switching Power On
Check that the power cord is securely plugged in at both ends. Check that the printer is connected
to the computer (See page 1-24).
1. Push the power switch to the ON ( | ) position.
2. Wait for the printer to warm up. During warm-up the message display will first indicate Self
test followed by Please wait.
3. At the end of the warm-up period, the ON LINE indicator lights, and the message display
indicates Ready.
The printer is now ready to print.
Note
If an error is detected while the printer is warming up, the ATTENTION indicator will light. A
message concerning the error will be displayed in the message display. (See Chapter 5.)
Power Switch
2.2. Operating Procedures