Filter
Top Products
Ignore CR
CR and LF
Ignore LF
CR and LF
>Print HEX-DUMP
(*
6
)
>Sleep timer
030 min.
>Form Feed
Time Out 030 sec.
MEMORY CARD >
>LF action
LF only
>Printer Reset
>Read fonts
(Continued from previous page)
>CR action
CR only
MP tray mode >
>MP tray size
A4 or Letter
Paper type
Normal
Deutsch
Français
>MSG language
English
Others >
>List of
Continued on next page
>Format
>Read data
>Write data
>Delete data
>List of
Partitions
(*
5
)
First
resident Fonts
Light
>Pitch
10.00 cpi
>Size
012.00 point (s)
(*
4
)
(*
3
)
(*
3
)
>Courier
Dark
Light
>Courier
Dark
>
Scalable
>AudreyTwo-Regu
lar SWC
>Bitmap font
00001
Font >
Bitmap
Landscape
Page orientation
Portrait
Page set
HARD DISK >
>Read data
>Read data
Opt. ROM >
>List of
partitions
Duplex mode
None
None
Auto Cassette
*2:
The printer can be set to print error data during KPDL
emulation. If this is set to On, error data will be printed if
trouble occurs during printing. This is set to Off before
leaving the factory.
*3:
You can select either of two Courier fonts, Dark (bold) or
Light (thin), as the default font. The original selection is
Dark. The selection made applies to both bit map fonts
and scalable fonts; the two cannot be set independently.
*4:
The >Size menu is not available for the
Courier
and
Letter
-
Gothic
fonts. The >Pitch menu is displayed
instead for these fixed width fonts.
*
5:
When using thin or thick paper, OHP sheet, postcard, or
other special paper, try changing the printer setting on the
Paper type menu. (See Appendix B.).
*
6:
After the printer accepts all data and there is no more
data from the computer, the printer will wait a set amount
of time without printing the final page. Once this preset
amount of time has elapsed, the printer will automatically
issue a form feed. This timeout setting can be set in 5-
second increments up to 495 seconds.
*
7:
This is the total number of pages printed by the printer up
to the present time.
*
8:
Although Auto is the default setting and
this menu does not usually appear, page protection mode
will be forcibly set to on if a Print overrun Press
CONTINUE error occurs due to insufficient printer memory.
Be sure to return this setting to Auto in order to maintain
high printer memory efficiency.
*
9:
This sets the print resolution.
*
10:
These menus are for service personnel.
They should not be operated by the user.
*1:
Depending on the emulation selected, the following
set>code sets are available.
IBM Proprinter
HP LaserJet 5M X24E or Line DIABLO 630 EPSON LQ-850
Printer
Bitmap and Scalable Fonts
ISO-6 ASCII
ISO-11 Sweden
ISO-15 Italian
ISO-17 Spain
ISO-21 Germany
ISO-60 Norway
ISO-69 France
HP Roman-8
ECMA-94 Latin 1
US Legal
IBM PC-8
IBM PC-8 (D/N)
IBM PC-850
ISO Latin 6
ISO-4 U.K.
Scalable Fonts
Only
PS math
PS text
Math8
Pi font
MS publishing
Windows
Winbalt
Desktop
ISO Latin 2
ISO Latin 5
Windows Latin 1
Windows Latin 2
Windows Latin 5
PC-775
PC-852 Latin 2
PC-1004
PC-Turkish
Macintosh
IBM US
IBM D/N
IBM PC-850
IBM PC-860
IBM PC-863
IBM PC-865
US Legal
DIABLO US
DIABLO France
DIABLO Germany
DIABLO U.K.
DIABLO Denmark
DIABLO Sweden
DIABLO Italy
DIABLO Spain
DIABLO Japan
US Legal
LQ US
LQ France
LQ Germany
LQ U.K.
LQ Denmark
LQ Sweden
LQ Italy
LQ Spain
LQ Japan
LQ Norway
LQ Denmark 2
LQ Spain 2
Latin America
IBM US
IBM D/N
IBM PC-850
IBM PC-860
IBM PC-863
IBM PC-865