Kyocera FS-6700 Printer User Manual


 
2-15
Chapter 2 Operating the Laser Printer
Canceling Printing
Perform the following procedure when you wish to cancel printing after it has begun.
1. Check if the message Processing is displayed in the message display.
2. Press the ON LINE key to take the printer offline.
3. Perform the necessary procedure on the computer to halt printing.
4. Press the CANCEL key.
5. The message Print Cancel? will appear in the message display and the interface to be
canceled will be displayed.
The following interfaces may be displayed.
Parallel
Serial
Option 1 (only when an optional interface is installed)
Option 2 (only when an optional interface is installed)
6. Selecting the interface to cancel using the + or key and then press the ENTER key. Printing
from the interface selected will be stopped.
A few pages may be printed even after the CANCEL key is pressed as remaining data received
before the CANCEL key was pressed is printed.
The message Print Cancel? Current job will also be displayed when the CANCEL key
is pressed for the purpose of stopping the printing of status pages or font lists from the control
panel. When the ENTER key is pressed, the message Cancelling data appears in the
message display and printing stops after the printer finishes printing the current page.