Kyocera KM-C830D Printer User Manual


 
Section 7 COPIER MANAGEMENT
7-11
(4) Making copies when copy management is
turned ON
When copy management is turned ON, Enter 7-digit code with #
keys. [ENTER 4-DIGIT CODE WITH #-KEYS] will appear on the
message display.
Inch specifications
Metric specifications
1
Use the numeric keys on the keypad to enter your
designated department code.
2
If Ready to copy. appears, copying is possible in the usual
manner.
NOTES
If the auto clear function (see page 2-5) engages, the message
display will return to the Ready to copy. screen.
Once you are finished copying, press the Energy Saver key in order
to engage copy management again.
Inch specifications Metric specifications
5
Press the Enter key.
The display will return to the screen in step 2.
6
Use the M cursor key to select z End and then press the
Enter key.
If you selected z ON in step 4, the department code
entry screen will appear.
If you selected z OFF in step 4, the message display will
return to the Ready to copy. screen.
Inch specifications
Metric specifications