Filter
Top Products
Section 9 TROUBLESHOOTING
9-14
3
Open the left cover to the SRDF.
* Be sure to hold the handle in the middle of the cover when
opening it.
4
Remove the jammed original without tearing it.
* If the original does happen to tear, remove any loose
scraps from inside the SRDF.
5
Open the paper conveyor cover (shown as 1 in the
illustration).
7Misfeed in the optional SRDF
If “Misfeed in feeder. Remove original(s).” is displayed and the
misfeed location indicator shown in the illustration lights, an original
has misfed in the SRDF. In this case, the original set indicator will
flash red. Perform the following procedure to remove the jammed
original.
1
Remove all of the originals remaining in the original table.
2
Remove all of the originals that have been ejected onto the
original eject table.
1