Filter
Top Products
Section 6 FUNCTIONS
6-27
● Separation insert mode
With this mode, sheets can be inserted at specified points among
copies of multiple originals. You can also select whether to copy onto
the inserted sheets themselves or not.
NOTES
• The drawer which contains the paper that to be fed as insert sheets
must be designated in advance. (See “* Insert tray” on
page 7-21.)
• If “Bypass” is selected under “* Insert tray” on page 7-21, it will not
be possible to make 2-sided copies of the separation inserts.
• The available settings for this mode will differ depending upon the
type of originals being copied and the type of finished copies that
are being made.
A circle (“Ț”) in the following table indicates that the setting is
possible.
1 If you choose to copy on the front and back side of the insert
sheets…
* The illustration shows the result when 2-sided copies are made.
2 If you choose to copy on the front side of the insert sheets only…
* The illustration shows the result when 2-sided copies are made.
3 If you choose to leave both the front and back side of the insert
sheets blank…
* The illustration shows the result when 2-sided copies are made.
1-sided
copies
2-sided
copies
1-sided
copies
2-sided
copies
Leave both
front and
back blank
Copy on
front only
Copy onto
front and
back
1-sided
originals
2-sided
originals
Types of copy
settings
available
Original/
Copy type
Ț
Ț
Ț
Ț
Ț
Ț
Ț
Ț
Ț
Ț