Filter
Top Products
Section 6 FUNCTIONS
6-36
With this mode, you can use open-faced originals (books, etc.) to
make open-faced two-sided copies in such a way that the finished
copies can be stacked and folded into a booklet format.
NOTES
• This mode is only available in duplex copiers.
• If the number of originals is not a multiple of four, the last page(s) of
the copies will come out blank.
• 2-sided copies cannot be made automatically when paper is being
fed from the multi-bypass tray.
1 If “Right” is selected as the page sequence…
Copying will be performed so that the stacked and folded pages of
the finished copies read from right to left.
2 If “Left” is selected as the page sequence…
Copying will be performed so that the stacked and folded pages of
the finished copies read from left to right.
15. Making booklets, etc. from book originals [Book to Book mode]
(Only available in duplex copiers)
1
Press the Book Mode key to light the corresponding
indicator.
2
Use the M cursor or the N cursor key to select “z Booklet”
and then press the Enter key.
Inch specifications
Metric specifications
3
Use the M cursor or the N cursor key to select “x Book-
Book” [“x BOOK>BOOK”] again and then press the Enter
key. The “Select copy stitch side” [“SELECT COPY BINDING
SIDE”] screen will appear.
Inch specifications
Metric specifications
Inch specifications Metric specifications