Filter
Top Products
Section 7 COPIER MANAGEMENT
7-31
#Checking the total counter
1
Use the M cursor or the N cursor key to select the type of
copies that you want to check the count for.
Inch specifications
Metric specifications
2
Use the M cursor key to select “End” and then press the
Enter key.
$Counter report print out
1
Make sure that 8 1/2" x 11" or 11" x 8 1/2" [A4] size paper is
loaded in one of the drawers.
* If a Memory Copy Board is installed in your copier, make
sure that 8 1/2" x 11" or 11" x 8 1/2" [A4 or A4R] size paper is
loaded in one of the drawers. (A4R paper can be loaded
into the optional 2-Drawer Paper Storage Unit.)
2
Use the M cursor or the N cursor key to select which report
you want to print out.
Inch specifications
Metric specifications
3
Press the Enter key.
The selected report will be printed out.
4
Use the M cursor key to select “z End” and then press the
Enter key.
%Type of paper
1
Use the M cursor or the N cursor key to select the type of
paper that is loaded in each drawer.
* The “Paper Type 1st Cassette” [“PAPER TYPE (1ST)”]
drawer setting is not available in duplex copiers.
Inch specifications
Metric specifications
2
Press the Enter key.