Filter
Top Products
Section 9 TROUBLESHOOTING
9-15
6
If there are any originals there, remove the jammed original
without tearing it.
* If the original does happen to tear, remove any loose
scraps from inside the SRDF.
* If the original is difficult to remove at all, turn the green
original feed dial (shown as 2 in the illustration). The
misfed original will be fed out to a location that makes it
easier to remove.
7
Close the paper cover.
8
Close the left cover. The original set indicator should go out.
Reset the originals and start copying again.
* Be sure to hold the handle in the middle of the cover when
closing it.
8Misfeed in the optional Document Finisher
If either of the misfeed location indicators shown in the illustration
lights, a misfeed has occurred in the Document Finisher. Refer to the
Operation Guide for the Document Finisher and remove the jammed
paper.
2