Kyocera KM-C830D Printer User Manual


 
Section 6 FUNCTIONS
6-6
With these modes, duplex (2-sided) copies can be made from a
variety of originals including open-faced (books, etc.) originals or
multiple one-sided originals.
NOTES
These modes are only available in duplex copiers.
2-sided copies cannot be made automatically when paper is being
fed from the multi-bypass tray.
(1) Making duplex (2-sided) copies from a 2-sided
original
With this mode, a 2-sided original is copied and the front and back
sides of the copy paper are used so that the copy looks just like the
original.
NOTES
Only paper sizes between 5 1/2" x 8 1/2" and 11" x 17" [between A5R
and A3] can be used in this mode.
The optional DF must be installed in your copier.
(2) Making duplex (2-sided) copies from an open-faced
(books, etc.) original
With this mode, the two facing pages of a magazine or book are
copied separately onto the front and back sides of the copy paper by
simply pressing the Start key.
NOTES
The binding direction of the originals can also be selected.
1 Left side binding: Open-faced originals are copied from the left
side page first.
2 Right side binding: Open-faced originals are copied from the right
side page first.
Only 8 1/2" x 11" and 11" x 8 1/2" [B5, A4R and A4] paper sizes can
be used in this mode. (A4R paper can be loaded into the optional 2-
Drawer Paper Storage Unit, while B5 paper can be set onto the
multi-bypass tray.)
3. Making duplex (2-sided) copies from various types of originals
[2-sided copy modes]