Filter
Top Products
Section 6 FUNCTIONS
6-35
4
Use the M cursor or the N cursor key to specify the type of
originals being copied.
Select “z 1-sided” if you are using 1-sided originals and
“x 2-sided” if you are using 2-sided originals.
Inch specifications
Metric specifications
5
Press the Enter key.
6
Use the M cursor or the N cursor key to select the binding
direction for the finished copies.
Inch specifications
Metric specifications
7
Press the Enter key. The “2-sided mode” [“DUPLEX MODE”]
screen will appear.
8
Set the original to be copied.
NOTES
• When setting the originals on the platen, be sure to set them in
order from the first page first.
• If necessary, select the location of paper feed.
9
Press the Start key. Scanning of the original will start.
• If you set the originals in the optional DF, copying will start
automatically.
• If you set the original on the platen, go to the next step.
10
Replace the first original with the next one and press the
Start key. Scanning of that next original will start.
Carry out this step for all of the originals that you want to
copy and, once you have finished scanning them all, press
the Enter key. Copying will start.
Inch specifications Metric specifications
Inch specifications Metric specifications