Filter
Top Products
Section 9 TROUBLESHOOTING
9-6
2
Remove the jammed paper without tearing it.
* If the paper does happen to tear, remove any loose scraps
from inside the copier.
3
Pull out the indicated drawer.
4
If there is any jammed paper inside that drawer, remove it
without tearing it.
* If the paper does happen to tear, remove any loose scraps
from inside the copier.
5
Push the drawer back in firmly and close the right side
drawer cover.
● Misfeed in the multi-bypass tray
If “Paper misfeed in stack bypass. Remove paper.” is displayed and
the misfeed location indicator shown in the illustration lights, a
misfeed has occurred in the multi-bypass tray. Perform the following
procedure to remove the jammed paper.
1
Remove all of the paper remaining in the multi-bypass tray.
2
Reset the paper in the multi-bypass tray.