Filter
Top Products
Section 3 PREPARATIONS
3-7
• Setting the envelopes on the multi-bypass tray
Perform the following procedure and set the envelopes on the
multi-bypass tray.
1
Open the multi-bypass tray.
2
Adjust the insert guides to fit the width of the envelopes that
are to be set on the multi-bypass tray.
3
Keeping the flap closed, situate envelopes with the print side
face-up and the flap side towards the front of the copier or
towards the leading edge of insertion. Then slide them all the
way into the multi-bypass tray, along the insert guides, as far
as they will go.
* The proper orientation will actually depending upon the type
of envelope being used.
* DO NOT set the flap towards the trailing edge of insertion
as there is a danger of it jamming.
Copier
Copier
Copier