Filter
Top Products
4: Web Manager Configuration
WiBox® 2100E Device Server User Guide 33
Serial Settings
To configure a channel’s serial settings:
1. From the main menu, click Serial Settings for either Channel 1 or Channel 2 to display the
Serial Settings page for the selected channel.
Figure 4-5. Channel Serial Settings
2. In the available fields, enter the following information:
Channel
Disable Serial Port
Available on Channel 2 settings only. When selected, disables
communication through the serial port.
Note: Using a telnet session you may enter a baud rate of 00
in channel settings to disable the serial port.
Port Settings
Protocol
Select the protocol type from the pull-down menu for the selected
channel. Available options are RS232, RS422/RS485 – 4 wire mode,
and RS485 - 2 wire mode.
Note: RS422/RS485 – 4 wire mode and RS485 - 2 wire mode apply to
Channel 2 only.