7: Setup Mode: Channel Configuration
WiBox® 2100E Device Server User Guide 61
Function 7 6 5 4 3
2 1 0
Clear when the network connection to or from the device is disconnected 1
Output Buffer (Network to Serial)
Clear with a connection initiated from the device to the network 1
Clear with a connection initiated from the network to the device 1
Clear when the network connection to or from the device is disconnected 1
Alternate Packing Algorithm (Pack Control)
Enable 1
Pack Control
The packing algorithms define how and when packets are sent to the network. The standard
algorithm is optimized for applications in which the unit is used in a local environment, allowing for
very small delays for single characters, while keeping the packet count low. The alternate packing
algorithm minimizes the packet count on the network and is especially useful in applications in a
routed Wide Area Network (WAN). Adjusting parameters in this mode can economize the network
data stream.
Pack control settings are enabled in Flush Mode. Set this value to 00 if you do not need specific
functions.
Note: All bit positions in the table that are blank represent “don’t care” bits for that
particular option; they can be set to either a 0 or 1 value.
Table 7-11. Pack Control Options
Option 7 6 5 4 3 2 1 0
Packing Interval
Interval: 12 msec 0 0
Interval: 52 msec 0 1
Interval: 250 msec 1 0
Interval: 5 sec 1 1
Trailing Characters
None 0 0
One 0 1
Two 1 0
Send Characters
2-Byte Send Character Sequence 1