Filter
Top Products
7: Setup Mode: Channel Configuration
WiBox® 2100E Device Server User Guide 52
Connect Mode
Connect Mode defines how the unit makes a connection, and how it reacts to incoming
connections over the network. The default setting is C0.
ConnectMode (C0) ? _
Enter Connect Mode options in hexadecimal notation.
Note: All bit positions in the table that are blank represent “don’t care” bits for that
particular option; they can be set to either a 0 or 1 value.
Table 7-5. Connect Mode Options
Connect Mode Option 7 6 5 4 3 2 1 0
a) Incoming Connection
Never accept incoming 0 0 0
Accept with active Modem Control In 0 1 0
Always Accept 1 1 0
b) Response
Nothing (quiet) 0
Character response (C=connect, D=disconnect,
N=unreachable)
1
c) Active Startup
No active startup 0 0 0 0
With any character 0 0 0 1
With active Modem Control In 0 0 1 0
With a specific start character 0 0 1 1
Manual connection 0 1 0 0
Autostart 0 1 0 1
Hostlist 0 0 1 0
d) Datagram Type
Directed UDP 1 1 0 0
e) Modem Mode
No Echo 0 0 1 1
Data Echo & Modem Response (Numeric) 0 1 1 1 1
Data Echo & Modem Response (Verbose) 0 1 1 1 0
Modem Response Only (Numeric) 0 0 1 1 1 1
Modem Response Only (Verbose) 0 0 1 1 1 0