Filter
Top Products
4: Web Manager Configuration
WiBox® 2100E Device Server User Guide 36
Figure 4-6. TCP Connection Settings
Connect Mode: Passive Connection
Accept Incoming Select Yes to accept incoming connections.
Password Required
Determines whether a password is required for an incoming passive
connection. This field is not available when a password is set for Telnet
mode. The default setting is No.
Password If Password Required was set to Yes, enter the password for passive
connections.
Modem Escape
Sequence Pass
Through
Disable or enable the unit's ability to send the escape sequence. The
default is Y (Yes) (send the escape sequence).