Filter
Top Products
4: Web Manager Configuration
WiBox® 2100E Device Server User Guide 42
WEP Options
Authentication Select an authentication scheme (Open/None or Shared) from the
drop-down list.
Encryption Select the encryption type (64 bits or 128 bits for WEP) from the drop-
down list. 64 bits is the default encryption for WEP.
Key Type Select the key type (Hex or Passphrase).
Key and Retype Key Enter the Encryption Key in hexadecimal value if Hex is selected as
the key type. Enter key as a string if Passphrase is selected as the key
type. Passphrase input is not the same as ASCII input. A passphrase of
more than 20 characters is recommended for adequate security. Spaces
and punctuation are permitted.
TX Key
Select the key to use for transmission.
WPA Options
Authentication Select Pre-Shared Keys from the drop-down list.
Encryption Select the encryption type from the drop-down list. TKIP is the default
encryption for WPA.
Key Type Select the key type (Hex or Passphrase).
Key and Retype Key Enter the Encryption Key in hexadecimal value if the key type is Hex.
Enter key as a string if the key type is Passphrase. Passphrase input is
not the same as ASCII input. A passphrase of more than 20 characters
is recommended. Spaces and punctuation characters are permitted.
802.11i/WPA2-Personal Options
Authentication Select Pre-Shared Keys from the drop-down list.
Encryption Select the encryption type from the drop-down list. CCMP is the default
encryption for WPA2.
Key Type Select the key type (Hex or Passphrase).
Key and Retype Key
Enter the
Encryption Key
in hexadecimal value if the key type is
Hex
.
Enter the key as a string if the key type is Passphrase. Passphrase
input is not the same as ASCII input. A passphrase of more than 20
characters is recommended. Spaces and punctuation characters are
permitted.
Advanced Settings
TX Data Rate
WiBox 2100E permits the control of the transmission data rate. Click the
Auto fallback check box to allow the WiBox 2100E to set the data rate
automatically (or leave unchecked to set the transmission rate
manually). The default rate is 54 Mbps.
If the Auto fallback check box is selected, choose the maximum
data rate from the drop-down list.
If the Auto fallback check box was not selected, select the fixed
data rate (in Mbps) from the drop-down list.
Min TX Data Rate
Selects the minimum data rate the device will use when auto-fallback is
enabled. The default is 1 Mbps.