Filter
Top Products
8: Setup Mode: Advanced Settings
WiBox® 2100E Device Server User Guide 72
Enable Enhanced Password (Y) ? _
The Y (Yes) option allows an extended security password of 16-characters for protecting Telnet
access.
Default Settings (Option 7)
Select 7 Defaults from the Change Setup menu to reset the unit’s Channel 1 configuration,
Channel 2 configuration, Security, and Expert settings to the factory default settings.
The server configuration settings for IP address, gateway IP address, and netmask remain
unchanged. See footnote for the WLAN settings that change.
Defaults for all settings are listed below.
Channel 1 Configuration
Baudrate
9600
I/F Mode
4C (1 stop bit, no parity, 8 bit, RS-232C)
Port No
10001
Connect Mode
C0 (always accept incoming connection; no active
connection startup)
Hostlist Retry Counter
3
Hostlist Retry Timeout
250 (msec)
Send Character
0x0D (CR)
All other parameters
0
Channel 2 Configuration
Baudrate
9600
I/F Mode
4C (1 stop bit, no parity, 8 bit, RS-232C)
Port No
10002
Connect Mode
C0 (always accept incoming connection; no active
connection startup)
Hostlist Retry Counter
3
Hostlist Retry Timeout
250 (msec)
Send Character
0x0D (CR)
All other parameters
0
WLAN Settings
Topology
1 (AdHoc)