Filter
Top Products
REMOVE TAPE ON CARTRIDGES
1 Remove the print cartridges.
2 Make sure the sticker and tape have been removed.
1
2
3 Reinsert the cartridges.
MAKE SURE THE PRINTER IS SET AS THE DEFAULT PRINTER AND IS NOT ON HOLD OR PAUSED
To set printer as default
1
From the Finder desktop, choose Applications Utilities Print Center or Printer Setup Utility, depending
on the operating system version you are using.
2 From the Printer List dialog, select your printer.
3 Click the Make Default icon.
To resume print jobs
1
From the Finder desktop, choose Applications Utilities Print Center or Printer Setup Utility, depending
on the operating system version you are using.
2 From the list of printers, double-click your printer.
3 From the printer pop-up menu, click Start Jobs if you want to resume all print jobs in the queue; if you want
to resume a particular print job, select the document name, and then click Resume.
RECONNECT THE POWER SUPPLY
1 Press to turn off the printer.
2 Disconnect the power cord from the wall outlet.
3 Gently remove the power supply from the printer.
4 Reconnect the power supply to the printer.
5 Plug the power cord into the wall outlet.
6 Press to turn the printer back on.
Troubleshooting
128